Original file

BMW 5-serie ZF 8HPxx BMW_8HPTU_AT50020_CC570A_M1

An original (stock) flash read of the ZF 8HPxx control unit, fitted in BMW 5-serie, hardware number BMW_8HPTU_AT50020_CC570A_M1, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5-seriepetrol
Control unit
ZF 8HPxx
File size
2,560.00 KB
Contents
Flash
Hardware number
BMW_8HPTU_AT50020_CC570A_M1

Technical data

Vehicle
BrandBMW
Car model5-serie
Enginepetrol
Displacement4.4
Control unit
Control unitZF 8HPxx
ECU makerZF
Hardware numberBMW_8HPTU_AT50020_CC570A_M1
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyd164a948548b1134

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a ZF 8HPxx whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BMW_8HPTU_AT50020_CC570A_M1. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of ZF 8HPxx

ZF 8HPxx original files