Original file

Nissan X Trail 2.2L Denso

An original (stock) flash read of the Denso control unit, fitted in Nissan X Trail 2.2L, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Vehicle
Nissan X Trail 2.2L2.2 136PS
Control unit
Denso
File size
1,024.00 KB
Contents
Flash

Technical data

Vehicle
BrandNissan
Car modelX Trail 2.2L
Engine2.2 136PS
Control unit
Control unitDenso
ECU makerDenso
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
From the file nameNissan Trail 136PS DENSO SH7058
File key41db6811b442af4b

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Denso whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Denso

HardwareSoftwareVehicles
NissanNissan
Nissan NavaraNissan Navara
Nissan PrimeraNissan Primera
Nissan Primera 3Nissan Primera 3
Nissan X-TrailNissan X-Trail
Opel Astra H Z17DTROpel Astra H Z17DTR
Opel CorsaOpel Corsa
Opel SignumOpel Signum

Denso original files