Original file

Nissan X-Trail Denso

An original (stock) flash read of the Denso control unit, fitted in Nissan X-Trail, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Vehicle
Nissan X-Trail2.2 diesel 136PS
Control unit
Denso
File size
1,024.00 KB
Contents
Flash

Technical data

Vehicle
BrandNissan
Car modelX-Trail
Engine2.2 diesel 136PS
Power136.0PS / 100.0kW
Control unit
Control unitDenso
ECU makerDenso
File
File typeOriginal flash read
File size1,024.00 KB (1,048,576 bytes)
File key79656c15b6f86dc5

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Denso whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Denso

HardwareSoftwareVehicles
Nissan NavaraNissan Navara
Nissan PrimeraNissan Primera
Nissan Primera 3Nissan Primera 3
Nissan X Trail 2.2LNissan X Trail 2.2L
Opel Astra H Z17DTROpel Astra H Z17DTR
Opel CorsaOpel Corsa
Opel SignumOpel Signum
Opel Signum 2004 Turbodiesel 130.2KWKWOpel Signum 2004 Turbodiesel 130.2KWKW

Denso original files