Original file

Mazda CX-3 Denso PS03-18881-G

An original (stock) flash read of the Denso control unit, fitted in Mazda CX-3, hardware number PS03-18881-G, 2,015.25 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandMazda
Car modelCX-3
Engine2.0 diesel 150PS
Fueldiesel
Displacement2.0
Power150PS / 110.3kW
Control unit
Control unitDenso
ECU makerDenso
Hardware numberPS03-18881-G
File
File typeOriginal flash read
File size2,015.25 KB (2,063,616 bytes)
File key48cf178c0b56f92f
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Denso whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number PS03-18881-G. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Denso

HardwareSoftwareVehicles
PERJ-18881-DPERJ-188K2-DMazda CX-3
PERR-18881-GPERR-188K2-GMazda CX-3
PG74-18881-AMazda CX-3
PS02-18881-GMazda CX-3
PS13-18881-EMazda CX3
PS1C-18881-BPS1C-188K2-BMazda 3
PS1S-18881-BPS1S-188K2-BMazda CX-5
PS5W-18881-AMazda MX5

Denso original files