Original file

Mazda CX-5 Denso SHHM-18881-G / GV3XSHHMT3JA

An original (stock) flash read of the Denso control unit, fitted in Mazda CX-5, hardware number SHHM-18881-G and software number GV3XSHHMT3JA, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mazda CX-52.2 184PS
Control unit
Denso
File size
4,096.00 KB
Contents
Flash
Hardware number
SHHM-18881-G
Software number
GV3XSHHMT3JA

Technical data

Vehicle
BrandMazda
Car modelCX-5
Engine2.2 184PS
Power184.0PS / 135.3kW
Control unit
Control unitDenso
ECU makerDenso
Hardware numberSHHM-18881-G
Software numberGV3XSHHMT3JA
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3a5a1c49a39791bb

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Denso whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number SHHM-18881-G and software number GV3XSHHMT3JA. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Denso

Denso original files