Original file

Audi Q5 Temic DL501 Gen1 8R0927156S

An original (stock) flash read of the Temic DL501 Gen1 control unit, fitted in Audi Q5, hardware number 8R0927156S, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q53.0 diesel · 240.0PS / 176.5kW
Control unit
Temic DL501 Gen1
File size
2,048.00 KB
Contents
Flash
Hardware number
8R0927156S

Technical data

Vehicle
BrandAudi
Car modelQ5
Engine3.0 diesel
Power240.0PS / 176.5kW
Control unit
Control unitTemic DL501 Gen1
ECU makerTemic
Hardware number8R0927156S
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf5d200ab362cb74c

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Temic DL501 Gen1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8R0927156S. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Temic DL501 Gen1

Temic DL501 Gen1 original files