Original file
Audi DL5014G1927156J
An original (stock) flash read of the DL501 control unit, fitted in Audi, hardware number 4G1927156J, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Technical data
| Brand | Audi |
|---|---|
| Engine | diesel |
| Fuel | diesel |
| Displacement | 3.0 |
| Power | 204.0PS / 150.0kW |
| Control unit | DL501 |
|---|---|
| Hardware number | 4G1927156J |
| File type | Original flash read |
|---|---|
| File size | 2,560.00 KB |
| File key | d124dff63edc7809 |
| Price | 15 € |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a DL501 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 4G1927156J. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
Other pairs of DL501
| Hardware | Software | Vehicles |
|---|---|---|
| 8K0927156H | Audi S4, Audi S5, Audi S4 Avant | |
| 8K1927156AC | Audi S4, Audi S5, Audi S4 DSG-REMAP | |
| 8K1927156J | Audi S5, Audi S4, Audi A5 | |
| 0B5927156F | Audi A6, Audi Q5, Audi A4 B8 3.0TDI DL501 | |
| 8K1927156AD | Audi S4, Audi S5 | |
| 4G0927166E | Audi S6, Audi S7 | |
| 8K0927156M | Audi DL501 | |
| 8K1927156AA | Audi A5, Audi A4 |