Original file
Audi Q5 Temic DL501 8R0927156K
An original (stock) flash read of the Temic DL501 control unit, fitted in Audi Q5, hardware number 8R0927156K, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Technical data
| Brand | Audi |
|---|---|
| Car model | Q5 |
| Engine | 2.0 diesel 170PS |
| Fuel | diesel |
| Displacement | 2.0 |
| Power | 170.0PS / 125.0kW |
| Control unit | Temic DL501 |
|---|---|
| ECU maker | Temic |
| Hardware number | 8R0927156K |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 500a38bf48b2f1c0 |
| Price | €15 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Temic DL501 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 8R0927156K. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.
Other pairs of Temic DL501
| Hardware | Software | Vehicles |
|---|---|---|
| 8K9927156B | Audi A6, Audi A5 | |
| 8K9927156C | Audi A4, Audi A5, Audi A4 Allroad Quattro | |
| 8K9927156G | Audi A4 Allroad Quattro, Audi A4 | |
| 8K9927156P | Audi A5 | |
| 8R0927156N | Audi Q5 | |
| 8R1927156J | Audi Q5 | |
| 8R1927156P | Audi Q3 | |
| 8R2927156M | Audi Q5, Audi A4 |