Original file

Škoda Temic DQ250-6A/6F/6V-MQB 0D9300043C / 52200D9300043C_5220_OTYS

An original (stock) flash read of the Temic DQ250-6A/6F/6V-MQB control unit, fitted in Škoda, hardware number 0D9300043C and software number 52200D9300043C_5220_OTYS, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda2.0 diesel
Control unit
Temic DQ250-6A/6F/6V-MQB
File size
1,504.00 KB
Contents
Flash
Hardware number
0D9300043C
Software number
52200D9300043C_5220_OTYS

Technical data

Vehicle
BrandŠkoda
Engine2.0 diesel
Control unit
Control unitTemic DQ250-6A/6F/6V-MQB
ECU makerTemic
Hardware number0D9300043C
Software number52200D9300043C_5220_OTYS
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keybb285a8ef498871e

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Temic DQ250-6A/6F/6V-MQB whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0D9300043C and software number 52200D9300043C_5220_OTYS. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Temic DQ250-6A/6F/6V-MQB

Temic DQ250-6A/6F/6V-MQB original files