Original file

Volkswagen lupo 1.2TDI Bosch EDC15P 0281010258 / 1037352679

An original (stock) flash read of the Bosch EDC15P control unit, fitted in Volkswagen lupo 1.2TDI, hardware number 0281010258 and software number 1037352679, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen lupo 1.2TDI1.2 diesel 61HP
Control unit
Bosch EDC15P
Read type
Calibration only (data set)
File
512.00 KB · Flash
Hardware number
0281010258
Software number
1037352679
Vehicle maker's hardware number
045906019Q

Technical data

Vehicle
BrandVolkswagen
Car modellupo 1.2TDI
Engine1.2 diesel 61HP
Control unit
Control unitBosch EDC15P
ECU makerBosch
Hardware number0281010258
Software number1037352679
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameVW lupo 61HP 045906019Q
File keya36e4cef7183272b
Identification read from the file
ECU nameEDC15P
Read typeCalibration only (data set)
Bosch part / software0281010258 / 1037352679Offset in the file: 0x07B640 / 0x050032
Vehicle maker's hardware number045906019QOffset in the file: 0x07B61E
Software / calibrationversion 0904
Engine description1,2l R3 EDCOffset in the file: 0x07B62A

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC15P whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281010258 and software number 1037352679. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC15P

HardwareSoftwareVehicles
02810102271037360790Audi A2 2000 Turbodiesel 44.9KWKW
02810102271037362780Audi A2
02810102571037360550Volkswagen Transporter 1.9D 2004 Turbo
02810102581037352562Volkswagen Lupo 1.2 TDI, Volkswagen Lupo 2001 Turbodiesel 44.9KWKW
02810102581037352999Volkswagen lupo 1.2TDI, Volkswagen Lupo 1.2 TDI
02810102591037354621Volkswagen Lupo, Volkswagen Lupo 1.4 TDI
0281010289Škoda Fabia
02810102891037352972Škoda Fabia D1900 R4V2T, Škoda Fabia 2004 74.3KWKW, Škoda Fabia

Bosch EDC15P original files

The Bosch EDC15P unit page