Original file

Volkswagen lupo 3L 1.2TDI Bosch EDC15P 0281010505 / 1313360520

An original (stock) flash read of the Bosch EDC15P control unit, fitted in Volkswagen lupo 3L 1.2TDI, hardware number 0281010505 and software number 1313360520, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen lupo 3L 1.2TDI1.2 diesel 61HP
Control unit
Bosch EDC15P
Read type
Full read (boot area included)
File
512.00 KB · Flash
Hardware number
0281010505
Software number
1313360520
Bosch part / software
1037360520
Vehicle maker's hardware number
045906019AA

Technical data

Vehicle
BrandVolkswagen
Car modellupo 3L 1.2TDI
Engine1.2 diesel 61HP
Control unit
Control unitBosch EDC15P
ECU makerBosch
Hardware number0281010505
Software number1313360520
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameVW lupo 3L 61HP
File key1c49e1b658f72ec4
Identification read from the file
ECU nameEDC15P+
Read typeFull read (boot area included)
Bosch part / software0281010505 / 1037360520Offset in the file: 0x0733C7 / 0x010046
Vehicle maker's hardware number045906019AAOffset in the file: 0x07339C
Software / calibrationversion 1313
Engine description1,2l R3 EDCOffset in the file: 0x0733A8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC15P whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281010505 and software number 1313360520. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC15P

HardwareSoftwareVehicles
02810104971037360018Volkswagen Golf4 D1900 R4V2T, Volkswagen Golf 1.9 TDI pd
02810104971037360447Volkswagen Golf IV PD ATD, Volkswagen Golf 1.9 TDI pd, Volkswagen Golf
02810105031037354620Volkswagen polo 1.4TDI AMF, Volkswagen Lupo 1.4 TDI, Volkswagen Polo 1.4 TDI PD
02810105051037360520Volkswagen Lupo 1.2 TDI
02810105171037360060Škoda Octavia 1.9TDI
02810105171037360480Škoda Octavia D1900 R4V2T
02810105431037360449Volkswagen Passat, Volkswagen passat 1.9TDI AVF, Volkswagen Golf4 1.9 TDI pd
02810105431037360705Volkswagen passat 1.9TDI AVF, Volkswagen Passat 1.9 TDI PD

Bosch EDC15P original files

The Bosch EDC15P unit page