Original file

Volkswagen Passat 2004 95.6KWKW Bosch EDC15P 0281010545 / 1037360450

An original (stock) flash read of the Bosch EDC15P control unit, fitted in Volkswagen Passat 2004 95.6KWKW, hardware number 0281010545 and software number 1037360450, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat 2004 95.6KWKW1.9 diesel · 130.0PS / 95.6kW
Control unit
Bosch EDC15P
Read type
Full read (boot area included)
File
512.00 KB · Flash
Hardware number
0281010545
Software number
1037360450
Vehicle maker's hardware number
038906019DT

Technical data

Vehicle
BrandVolkswagen
Car modelPassat 2004 95.6KWKW
Engine1.9 diesel
Power130.0PS / 95.6kW
Control unit
Control unitBosch EDC15P
ECU makerBosch
Hardware number0281010545
Software number1037360450
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
From the file nameVW Passat 1.9 TDI 2004
File key1032186dc23799ab
Identification read from the file
ECU nameEDC15P+
Read typeFull read (boot area included)
Bosch part / software0281010545 / 1037360450Offset in the file: 0x053395 / 0x010046
Vehicle maker's hardware number038906019DTOffset in the file: 0x05336A
Software / calibrationversion 1267
Engine description1,9l R4 EDCOffset in the file: 0x053376

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC15P whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281010545 and software number 1037360450. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC15P

HardwareSoftwareVehicles
02810105171037360060Škoda Octavia 1.9TDI
02810105171037360480Škoda Octavia D1900 R4V2T
02810105431037360449Volkswagen Passat, Volkswagen passat 1.9TDI AVF, Volkswagen Golf4 1.9 TDI pd
02810105431037360705Volkswagen passat 1.9TDI AVF, Volkswagen Passat 1.9 TDI PD
02810105451037360708Volkswagen Passat
02810105531037360009Volkswagen passat 1.9TDI AVB
02810105531037360479Volkswagen Passat, Volkswagen A4, Audi
02810105541037360008Volkswagen Passat 1.9 TDI PD, Volkswagen Passat

Bosch EDC15P original files

The Bosch EDC15P unit page