Original file

Mercedes-Benz Sprinter213/313 Bosch EDC16CP31 CR40-64x-70T3-906-095KW-40-0MEF-03-IAG-001_DPF7_ME7 / 1037383391

An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Mercedes-Benz Sprinter213/313, hardware number CR40-64x-70T3-906-095KW-40-0MEF-03-IAG-001_DPF7_ME7 and software number 1037383391, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter213/3132.1 diesel 095KW
Control unit
Bosch EDC16CP31
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
CR40-64x-70T3-906-095KW-40-0MEF-03-IAG-001_DPF7_ME7
Software number
1037383391

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter213/313
Engine2.1 diesel 095KW
Control unit
Control unitBosch EDC16CP31
ECU makerBosch
Hardware numberCR40-64x-70T3-906-095KW-40-0MEF-03-IAG-001_DPF7_ME7
Software number1037383391
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key29a3781d73709058
Identification read from the file
ECU nameEDC16CP31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037383391Offset in the file: 0x040010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR40-64x-70T3-906-095KW-40-0MEF-03-IAG-001_DPF7_ME7 and software number 1037383391. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP31

Bosch EDC16CP31 original files

The Bosch EDC16CP31 unit page