Original file
Chrysler Jeep Commander Bosch EDC16CP31 CR4C-642-45W1-XH-EUOP_160kW_V2_Dpf_EGS53_1408x010 / 1037396177
An original (stock) flash read of the Bosch EDC16CP31 control unit, fitted in Chrysler Jeep Commander, hardware number CR4C-642-45W1-XH-EUOP_160kW_V2_Dpf_EGS53_1408x010 and software number 1037396177, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Chrysler Jeep Commander160KW
- Control unit
- Bosch EDC16CP31
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR4C-642-45W1-XH-EUOP_160kW_V2_Dpf_EGS53_1408x010
- Software number
- 1037396177
Technical data
| Brand | Chrysler |
|---|---|
| Car model | Jeep Commander |
| Engine | 160KW |
| Fuel | Diesel |
| Displacement | 3.0 |
| Control unit | Bosch EDC16CP31 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR4C-642-45W1-XH-EUOP_160kW_V2_Dpf_EGS53_1408x010 |
| Software number | 1037396177 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | c0f1bf60d7d3ecd5 |
| ECU name | EDC16CP31 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037396177 | Offset in the file: 0x190010 |
| Bosch project identifier (EPK) | 99/1/EDC16CP31/001/B209 | Offset in the file: 0x1906FB |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC16CP31 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR4C-642-45W1-XH-EUOP_160kW_V2_Dpf_EGS53_1408x010 and software number 1037396177. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC16CP31
| Hardware | Software | Vehicles |
|---|---|---|
| CR4C-642-45W1-WH_EUOP_160kW_V2_DPF_EGS53_1408x022 | 1037396171 | Chrysler Grand Cherokee 3.0CRDI 2007, Chrysler Cherokee/Liberty, Jeep |
| CR4C-642-45W1-XH-EUOP_160KW_V1_DPF_EGS53_2607X009 | 1037390919 | Jeep Commander |
| CR4C-642-45W1-XH-EUOP_160KW_V2_DPF_EGS53_1408X010 | 1037396177 | Jeep Commander |
| CR4C-642-45W1-XH-EUOP_160kW_V1_Dpf_EGS53_2607x009 | 1037390919 | Jeep Commander |
| CR4C-642-52W1-WK-BIN10_OP-160KW-DPF_DL_4X2_WITH_DPF_EGS53-3 | Chrysler Grand Cherokee | |
| CR4C-642-52W3-WK-BIN10_OP-160KW-V1_4X4_WITH_DPF-0607X038ME | 1037388123 | Jeep Grand Cherokee, Mercedes-Benz |
| CR4C-642-53W1-WK-BIN10_OP-160KW-S2B_4X4_DPF_EGS53-1207X006 | 1037390506 | Jeep Grand Cherokee |
| CR4C-642-53W1-WK-BIN10_OP-160KW-V1_4X4_DPF_EGS53-2807X008 | 1037392204 | Jeep Grand Cherokee, Mercedes-Benz |