Original file

Seat Bosch ME17.5.26 04C907309BE / 10SW030033

An original (stock) flash read of the Bosch ME17.5.26 control unit, fitted in Seat, hardware number 04C907309BE and software number 10SW030033, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
SeatCHYB
Control unit
Bosch ME17.5.26
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
04C907309BE
Software number
10SW030033
Software / calibration
04C906057AN

Technical data

Vehicle
BrandSeat
EngineCHYB
Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04C907309BE
Software number10SW030033
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key34365134e7120ac8
Identification read from the file
ECU nameME17.5.26
Read typeFull read (boot area included)
Bosch part / software10SW030033Offset in the file: 0x04001A
Vehicle maker's hardware number04C907309BEOffset in the file: 0x03A19C
Software / calibration04C906057AN · version 5635Offset in the file: 0x03A1B6
Internal build stringMED17 CB.04.04.03Offset in the file: 0x00F96C
Bosch project identifier (EPK)38/1/MED17/3///S17526V11C000_M24G74///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309BE and software number 10SW030033. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.26

HardwareSoftwareVehicles
04C907309BE04C907309BEVolkswagen Polo, Volkswagen Ibiza, Seat
04C907309BE10SW023681Seat
04C907309BE10SW023814Volkswagen Polo, Seat
04C907309BE10SW030032Seat Ibiza
04C907309BJ04C907309BJSeat Fabia, Seat Ibiza, Škoda
04C907309BJ10SW045952Škoda Fabia
04C907309J003490Seat Ibiza 1.0i
04C907309J04C906057Volkswagen Polo

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page