Original file

Seat Bosch ME17.5.26 04E907309CB / 10SW004984

An original (stock) flash read of the Bosch ME17.5.26 control unit, fitted in Seat, hardware number 04E907309CB and software number 10SW004984, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
SeatCHYB · 75.0PS / 55.2kW
Control unit
Bosch ME17.5.26
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
04E907309CB
Software number
10SW004984
Software / calibration
04C906057AB

Technical data

Vehicle
BrandSeat
EngineCHYB
FuelPetrol
Displacement1.0
Power75.0PS / 55.2kW
Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04E907309CB
Software number10SW004984
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key92a0e1342bdb2bad
Identification read from the file
ECU nameME17.5.26
Read typeFull read (boot area included)
Bosch part / software10SW004984Offset in the file: 0x04001A
Vehicle maker's hardware number04E907309CBOffset in the file: 0x038474
Software / calibration04C906057AB · version 2707Offset in the file: 0x03848E
Internal build stringMED17 CB.04.04.00Offset in the file: 0x00F054
Bosch project identifier (EPK)38/1/MED17/3///S17526V11C000_M24F10///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309CB and software number 10SW004984. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat IbizaFlash2,048.00 KB€15Add to cart
Seat IbizaFlash2,048.00 KB€15Add to cart
FlashFlash1,536.00 KB€15Add to cart

All reads of 04E907309CB / 10SW004984

Other pairs of Bosch ME17.5.26

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page