Original file

Audi Bosch MED17.1.10 06L907309A / 10SW011236

An original (stock) flash read of the Bosch MED17.1.10 control unit, fitted in Audi, hardware number 06L907309A and software number 10SW011236, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi
Control unit
Bosch MED17.1.10
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
06L907309A
Software number
10SW011236
Software / calibration
8W0907115K

Technical data

Vehicle
BrandAudi
Control unit
Control unitBosch MED17.1.10
ECU makerBosch
Hardware number06L907309A
Software number10SW011236
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key61cff8edae0829b0
Identification read from the file
Read typeFull read (boot area included)
Bosch part / software10SW011236Offset in the file: 0x02001A
Vehicle maker's hardware number06L907309AOffset in the file: 0x3E7D58
Software / calibration8W0907115K · version 0003Offset in the file: 0x3E7D72
Internal build stringMED17 CB.08.08.03Offset in the file: 0x215CA1
Bosch project identifier (EPK)41/1/MED17/3///DMG1001A01C1296_MY16GE2///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 06L907309A and software number 10SW011236. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.10

HardwareSoftwareVehicles
06L907309Audi Q5
06L907309A06L907309AAudi A4, Audi A5
06L907309A1037550440Audi A4, Audi A5
06L907309A10SW030002Audi A5
06L907309A10SW044169Audi A4
06L907309A10SW078217Audi A4
06L907309A8W0907115KAudi A5

Bosch MED17.1.10 original files