Original file

Jaguar XE Bosch EDC17 GX73-12K532-SAC / 10SW000977

An original (stock) flash read of the Bosch EDC17 control unit, fitted in Jaguar XE, hardware number GX73-12K532-SAC and software number 10SW000977, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XE2.0 diesel
Control unit
Bosch EDC17
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
GX73-12K532-SAC
Software number
10SW000977
Bosch part / software
10SW000058

Technical data

Vehicle
BrandJaguar
Car modelXE
Engine2.0 diesel
Control unit
Control unitBosch EDC17
ECU makerBosch
Hardware numberGX73-12K532-SAC
Software number10SW000977
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key14b8ae9fdeff0510
Identification read from the file
ECU nameMEDC17.9
Read typeFull read (boot area included)
Bosch part / software10SW000058Offset in the file: 0x18001A
Bosch project identifier (EPK)42/1/MEDC17_9/190/P1226//P1226C083_3_20///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GX73-12K532-SAC and software number 10SW000977. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17

Bosch EDC17 original files