Original file

Jaguar F Pace Bosch EDC17 H7A3-12C520-FCD / 10SW042236

An original (stock) flash read of the Bosch EDC17 control unit, fitted in Jaguar F Pace, hardware number H7A3-12C520-FCD and software number 10SW042236, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar F Pace
Control unit
Bosch EDC17
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
H7A3-12C520-FCD
Software number
10SW042236
Bosch part / software
10SW043040
Software / calibration
HY32-12B684-FAA

Technical data

Vehicle
BrandJaguar
Car modelF Pace
Control unit
Control unitBosch EDC17
ECU makerBosch
Hardware numberH7A3-12C520-FCD
Software number10SW042236
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameJaguar Pace
File keyd4dd20881ecc459a
Identification read from the file
ECU nameMEDC17.9
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW043040Offset in the file: 0x02001A
Software / calibrationHY32-12B684-FAAOffset in the file: 0x00FD00
Engine descriptionH7A3-14C204-FCDOffset in the file: 0x1FFF02
Bosch project identifier (EPK)53/1/MEDC17_9/190/P1226//P1226C352_3_50_TP_ENABLED///Offset in the file: 0x046028

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number H7A3-12C520-FCD and software number 10SW042236. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17

HardwareSoftwareVehicles
GX73-12K532-FLH10SW070966Jaguar XE
GX73-12K532-SAC10SW000977Jaguar XE
GX73-12K532-SAG10SW030486Jaguar XE
GX73-12K532-SBG10SW023576Jaguar XE
HJ32-12K532-FBE10SW028942Land Rover Evoque
HJ32-12K532-FBF10SW034851Land Rover Evoque
HJ32-12K532-FTAHJ32-12K532-FZALand Rover Range Rover Evoque
HJ32-12K532-FTE10SW075998Land Rover Evoque

Bosch EDC17 original files