Original file

Land Rover 2017y Bosch MEDC17.9 H7A3-14C204-FCD / 10SW022446

An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Land Rover 2017y, hardware number H7A3-14C204-FCD and software number 10SW022446, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover 2017y
Control unit
Bosch MEDC17.9
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
H7A3-14C204-FCD
Software number
10SW022446
Bosch part / software
10SW043040
Software / calibration
HY32-12B684-FAA

Technical data

Vehicle
BrandLand Rover
Car model2017y
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware numberH7A3-14C204-FCD
Software number10SW022446
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameLand Rover 2017y
File key6fef1287b6e811ef
Identification read from the file
ECU nameMEDC17.9
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW043040Offset in the file: 0x02001A
Software / calibrationHY32-12B684-FAAOffset in the file: 0x00FD00
Engine descriptionH7A3-14C204-FCDOffset in the file: 0x1FFF02
Bosch project identifier (EPK)53/1/MEDC17_9/190/P1226//P1226C352_3_50_TP_ENABLED///Offset in the file: 0x046028

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number H7A3-14C204-FCD and software number 10SW022446. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEDC17.9

HardwareSoftwareVehicles
GX73-12K532-SAD10SW004495Jaguar XE
GX73-12K532-SAF10SW023568Jaguar XE
GX73-12K532-SBDMEDC17_9Jaguar XE 2.0d
GX73-12K532-SBH10SW032742Jaguar XF
HJ32-12K532-FTB10SW025565Land Rover Evoque
HJ32-12K532-GAF10SW028779Land Rover Discovery
HJ32-12K532-GTB10SW013724Land Rover Discovery
HJ32-12K532-GTBHJ32-12K532-GTBLand Rover Range Rover Evoque

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page