Original file

Jaguar F-Pace Bosch EDC17 HK83-12K532-KLE / 10SW023716

An original (stock) flash read of the Bosch EDC17 control unit, fitted in Jaguar F-Pace, hardware number HK83-12K532-KLE and software number 10SW023716, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar F-Pace2.0 diesel 180PS
Control unit
Bosch EDC17
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
HK83-12K532-KLE
Software number
10SW023716

Technical data

Vehicle
BrandJaguar
Car modelF-Pace
Engine2.0 diesel 180PS
Power180PS / 132.4kW
Control unit
Control unitBosch EDC17
ECU makerBosch
Hardware numberHK83-12K532-KLE
Software number10SW023716
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2efcea28376b0c53
Identification read from the file
ECU nameMEDC17.9
Read typeCalibration only (data set)
Bosch part / software10SW023716Offset in the file: 0x02001A
Bosch project identifier (EPK)42/1/MEDC17_9/190/P1226//P1226C226_3_30///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HK83-12K532-KLE and software number 10SW023716. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17

Bosch EDC17 original files