Original file

Land Rover Evoque 2.0D Bosch MEDC17.9 HX73-12C520-FFE / 10SW068833

An original (stock) flash read of the Bosch MEDC17.9 control unit, fitted in Land Rover Evoque 2.0D, hardware number HX73-12C520-FFE and software number 10SW068833, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Evoque 2.0D2.0
Control unit
Bosch MEDC17.9
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
HX73-12C520-FFE
Software number
10SW068833
Bosch part / software
10SW023191
Software / calibration
GX73-12B684-FAB

Technical data

Vehicle
BrandLand Rover
Car modelEvoque 2.0D
Engine2.0
Control unit
Control unitBosch MEDC17.9
ECU makerBosch
Hardware numberHX73-12C520-FFE
Software number10SW068833
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameLand Rover Evoque
File key95d0382575a7395e
Identification read from the file
ECU nameMEDC17.9
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW023191Offset in the file: 0x02001A
Software / calibrationGX73-12B684-FABOffset in the file: 0x00FD00
Engine descriptionHX73-14C204-FFEOffset in the file: 0x1FFF02
Bosch project identifier (EPK)47/1/MEDC17_9/190/P1226//P1226C256_3_20_CONT///Offset in the file: 0x04347C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEDC17.9 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HX73-12C520-FFE and software number 10SW068833. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEDC17.9

HardwareSoftwareVehicles
HK72-12K532-GTFHK72-12K532-GTFLand Rover Discovery
HK83-12K532-KCC10SW008190Jaguar F-Pace
HK83-12K532-KCE10SW023732Jaguar F-Pace, Jaguar F-pace
HK83-12K532-LBC10SW007549Jaguar F-Pace
HX73-12K532-KBC10SW007597Jaguar XF
HX73-12K532-KBE10SW023723Jaguar F-Pace
HY32-12B684-FAA10SW013429Land Rover Discovery, Land Rover Range Rover, Land Rover Velar
HY32-12B684-FAA10SW016770Jaguar F Pace, Jaguar XF, Jaguar XE

Bosch MEDC17.9 original files

The Bosch MEDC17.9 unit page