Original file

Jeep Wrangler Bosch EDC17C69 68275933AA / 10SW006334

An original (stock) flash read of the Bosch EDC17C69 control unit, fitted in Jeep Wrangler, hardware number 68275933AA and software number 10SW006334, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Wrangler2.8 diesel 200PS
Control unit
Bosch EDC17C69
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
68275933AA
Software number
10SW006334
Bosch part / software
10SW010404
Software / calibration
P_1404_EDC17C69_J145_1

Technical data

Vehicle
BrandJeep
Car modelWrangler
Engine2.8 diesel 200PS
Power200PS / 147.1kW
Control unit
Control unitBosch EDC17C69
ECU makerBosch
Hardware number68275933AA
Software number10SW006334
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfa61a1a3eaa2bba9
Identification read from the file
ECU nameEDC17C69
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW010404Offset in the file: 0x02001A
Software / calibrationP_1404_EDC17C69_J145_1Offset in the file: 0x05F478
Internal build string11B.11.02.00RBOffset in the file: 0x00E580
Bosch project identifier (EPK)51/1/EDC17C69/1404/P1404//P_1404_EDC17C69_J145_1///Offset in the file: 0x05F478

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C69 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 68275933AA and software number 10SW006334. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C69

HardwareSoftwareVehicles
10SW012496P140J145012496Jeep Wrangler
33920-55P01037551229Suzuki SX4, Suzuki Vitara
58019192811037556304Iveco Daily
68256850AA10SW085733Jeep Gladiator
68299880AC10SW006334Jeep Wrangler
68309538AH68335791AAJeep Wrangler
68309538AJ10SW048952Jeep Wrangler
68309539AH68335791AAJeep Wrangler

Bosch EDC17C69 original files

The Bosch EDC17C69 unit page