Original file

Mercedes-Benz V-classe Bosch EDC17C66 CR41NFZ-651-FKS0-447A_4X4_LL-120kW-3OSL2S_D-EU6c_OPS-ME16 / 033060

An original (stock) flash read of the Bosch EDC17C66 control unit, fitted in Mercedes-Benz V-classe, hardware number CR41NFZ-651-FKS0-447A_4X4_LL-120kW-3OSL2S_D-EU6c_OPS-ME16 and software number 033060, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz V-classe2.2 diesel 120KW
Control unit
Bosch EDC17C66
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR41NFZ-651-FKS0-447A_4X4_LL-120kW-3OSL2S_D-EU6c_OPS-ME16
Software number
033060
Bosch part / software
10SW033060
Software / calibration
6519020703

Technical data

Vehicle
BrandMercedes-Benz
Car modelV-classe
Engine2.2 diesel 120KW
Control unit
Control unitBosch EDC17C66
ECU makerBosch
Hardware numberCR41NFZ-651-FKS0-447A_4X4_LL-120kW-3OSL2S_D-EU6c_OPS-ME16
Software number033060
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key888f675755cab2ce
Identification read from the file
ECU nameEDC17C66
Read typeCalibration only (data set)
Bosch part / software10SW033060Offset in the file: 0x02001A
Software / calibration6519020703Offset in the file: 0x0893D7
Data set number6519038447Offset in the file: 0x0893E2
Boot software6519041400Offset in the file: 0x0893CC
Bosch project identifier (EPK)45/1/EDC17C66/1/P695//P_695_FKS0__CV172300///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C66 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR41NFZ-651-FKS0-447A_4X4_LL-120kW-3OSL2S_D-EU6c_OPS-ME16 and software number 033060. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C66

Bosch EDC17C66 original files

The Bosch EDC17C66 unit page