Original file

Mercedes-Benz Viano Bosch EDC17CP10 3ZNW-165KW-EU5 / 1037503294

An original (stock) flash read of the Bosch EDC17CP10 control unit, fitted in Mercedes-Benz Viano, hardware number 3ZNW-165KW-EU5 and software number 1037503294, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Viano3.0 diesel 165KW
Control unit
Bosch EDC17CP10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
3ZNW-165KW-EU5
Software number
1037503294
Bosch part / software
1037505834
Software / calibration
6429029000

Technical data

Vehicle
BrandMercedes-Benz
Car modelViano
Engine3.0 diesel 165KW
Control unit
Control unitBosch EDC17CP10
ECU makerBosch
Hardware number3ZNW-165KW-EU5
Software number1037503294
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key340efabb8d8f1a48
Identification read from the file
ECU nameEDC17CP10
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037505834Offset in the file: 0x02001A
Software / calibration6429029000Offset in the file: 0x03EF03
Data set number6429038301Offset in the file: 0x1BDCA5
Boot software6429040100Offset in the file: 0x00FC59
Bosch project identifier (EPK)45/1/EDC17CP10/1/P695//P_695_61N6_CV094700///Offset in the file: 0x040EE4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 3ZNW-165KW-EU5 and software number 1037503294. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz VitoFlash2,048.00 KB€15Add to cart
Mercedes-Benz VaenoFlash2,048.00 KB€15Add to cart
Mercedes-Benz VitoFlash2,048.00 KB€15Add to cart
Mercedes-Benz VITO230Flash2,048.00 KB€15Add to cart
Mercedes-Benz VianoFlash2,048.00 KB€15Add to cart
Mercedes-Benz VITO122Flash4,096.00 KB€15Add to cart
Mercedes-Benz VitoFlash4,096.00 KB€15Add to cart
Mercedes-Benz VITO200/220Flash2,048.00 KB€15Add to cart
Mercedes-Benz VitoFlash2,048.00 KB€15Add to cart
Mercedes-Benz VITO200/220Flash2,048.00 KB€15Add to cart
Mercedes-Benz VITO122Flash2,048.00 KB€15Add to cart
Mercedes-Benz VitoFlash2,048.00 KB€15Add to cart

All reads of 3ZNW-165KW-EU5 / 1037503294

Other pairs of Bosch EDC17CP10

HardwareSoftwareVehicles
02810169771037516372Mercedes-Benz Sprinter
02810169771037529284Mercedes-Benz Sprinter219 319 419 519
08480020101037500230Mercedes-Benz GL
10375254011037501644Mercedes-Benz Sprinter219/319/419/519 3.0 CDI V6
3ZNW-165KW-EU51037512400Mercedes-Benz Vito, Mercedes-Benz VIANO 30CDI 2011 164.8KWKW
3ZNW-165KW-EU51037512483Mercedes-Benz Vito
3ZNW-165KW-EU51037516352Mercedes-Benz VITO122 V6 Turbo Diesel, Mercedes-Benz VITO122, Mercedes-Benz Viano
3ZNW-165KW-EU51037516372Mercedes-Benz VITO122, Mercedes-Benz Vito, Mercedes-Benz Viano

Bosch EDC17CP10 original files

The Bosch EDC17CP10 unit page