Original file

Renault Scenic / Grand Scenic Bosch EDC17CP19 0281016228 / 1037524846

An original (stock) flash read of the Bosch EDC17CP19 control unit, fitted in Renault Scenic / Grand Scenic, hardware number 0281016228 and software number 1037524846, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Scenic / Grand Scenic2.0 diesel 160PS
Control unit
Bosch EDC17CP19
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
0281016228
Software number
1037524846
Software / calibration
r1a2_

Technical data

Vehicle
BrandRenault
Car modelScenic / Grand Scenic
Engine2.0 diesel 160PS
Power160.0PS / 117.7kW
Control unit
Control unitBosch EDC17CP19
ECU makerBosch
Hardware number0281016228
Software number1037524846
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key5de439167a31b4fc
Identification read from the file
ECU nameEDC17CP19
Read typeFull read (boot area included)
ProcessorTC1766
Bosch part / software1037524846Offset in the file: 0x08001A
Software / calibrationr1a2_Offset in the file: 0x040078
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00CA8F
Bosch project identifier (EPK)34/1/EDC17_CP19/15/P_659//r1a2_///Offset in the file: 0x040078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP19 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016228 and software number 1037524846. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP19

HardwareSoftwareVehicles
1037541579
1037541851Renault Grand Scenic
02810152281037524837Renault Megane III
0281016227Renault Megane III
02810181321037514802Renault Megane
02810181321037516528Renault Megane III
0556RD0370323R1037524839Renault Scenic
06441629071037503103Renault Scenic

Bosch EDC17CP19 original files