Original file

Renault Megane III Bosch EDC17CP19 1037524846

An original (stock) flash read of the Bosch EDC17CP19 control unit, fitted in Renault Megane III, software number 1037524846, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Megane III2.0 diesel 160PS
Control unit
Bosch EDC17CP19
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Software number
1037524846
Software / calibration
r1a2_

Technical data

Vehicle
BrandRenault
Car modelMegane III
Engine2.0 diesel 160PS
Power160.0PS / 117.7kW
Control unit
Control unitBosch EDC17CP19
ECU makerBosch
Software number1037524846
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key47831896833ad4c6
Identification read from the file
ECU nameEDC17CP19
Read typeFull read (boot area included)
ProcessorTC1766
Bosch part / software1037524846Offset in the file: 0x08001A
Software / calibrationr1a2_Offset in the file: 0x040078
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00CA8F
Bosch project identifier (EPK)34/1/EDC17_CP19/15/P_659//r1a2_///Offset in the file: 0x040078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP19 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 1037524846. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP19

HardwareSoftwareVehicles
1037514802Renault Megane III, Renault Scenic, Renault Megane
1037516538Renault Scenic
1037524837Renault Megane
1037524839Renault Scenic, Renault Scenic / Grand Scenic, Renault Megane III
1037524895Renault Megane
1037524926Renault megane 3
1037526474Renault Megane III, Renault Megane, Renault Megane 3
1037539141Renault Megane III, Renault Megane II

Bosch EDC17CP19 original files