Original file

Renault Megane III Bosch EDC17CP19 1037539942659_0310 / 1037539141

An original (stock) flash read of the Bosch EDC17CP19 control unit, fitted in Renault Megane III, hardware number 1037539942659_0310 and software number 1037539141, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Renault Megane III2.0 diesel 165PS
Control unit
Bosch EDC17CP19
Read type
OBD read (no boot area)
File
1,504.00 KB · Flash
Hardware number
1037539942659_0310
Software number
1037539141
Software / calibration
r7600_310_

Technical data

Vehicle
BrandRenault
Car modelMegane III
Engine2.0 diesel 165PS
Power165.0PS / 121.4kW
Control unit
Control unitBosch EDC17CP19
ECU makerBosch
Hardware number1037539942659_0310
Software number1037539141
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key4fea114ada6b7f82
Identification read from the file
ECU nameEDC17CP19
Read typeOBD read (no boot area)
Bosch part / software1037539141Offset in the file: 0x08001A
Software / calibrationr7600_310_Offset in the file: 0x040078
Bosch project identifier (EPK)39/1/EDC17_CP19/15/P_659//r7600_310_///Offset in the file: 0x040078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP19 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 1037539942659_0310 and software number 1037539141. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP19

HardwareSoftwareVehicles
02810181321037514802Renault Megane
02810181321037516528Renault Megane III
0556RD0370323R1037524839Renault Scenic
06441629071037503103Renault Scenic
1037539942659_03101037539942Renault Megane III
4457900258677001731037504386Renault Scenic
4719RD0370323R1037539141Renault Megane III
5242210248757201731037524837Renault Megane III

Bosch EDC17CP19 original files