Original file

SAAB 9 5 Bosch EDC17CP21 0281017740 / 1037506696

An original (stock) flash read of the Bosch EDC17CP21 control unit, fitted in SAAB 9 5, hardware number 0281017740 and software number 1037506696, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
SAAB 9 52.0 · 190.0PS / 139.7kW
Control unit
Bosch EDC17CP21
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281017740
Software number
1037506696
Software / calibration
P_640_EDC17CP21_SB5CP_1

Technical data

Vehicle
BrandSAAB
Car model9 5
Engine2.0
Power190.0PS / 139.7kW
Control unit
Control unitBosch EDC17CP21
ECU makerBosch
Hardware number0281017740
Software number1037506696
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0b26c4bca020b9d3
Identification read from the file
ECU nameEDC17CP21
Read typeCalibration only (data set)
Bosch part / software1037506696Offset in the file: 0x18001A
Software / calibrationP_640_EDC17CP21_SB5CP_1Offset in the file: 0x180A10
Bosch project identifier (EPK)53/1/EDC17_CP21/640/P_640//P_640_EDC17CP21_SB5CP_1///Offset in the file: 0x180A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP21 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281017740 and software number 1037506696. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP21

HardwareSoftwareVehicles
02810177401037506538SAAB 9-5
02810177401037506695SAAB 9 5 II TTiD
02810177401037508796SAAB 9-5 II, SAAB 95, SAAB 9-5
02810177401037517399SAAB 9-5 II
02810177401037517400SAAB 9-3 II

Bosch EDC17CP21 original files