Original file

Mercedes-Benz Sprinter BR PERFORMANCE Bosch EDC17CP46 CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME03_02 / 1037543684

An original (stock) flash read of the Bosch EDC17CP46 control unit, fitted in Mercedes-Benz Sprinter BR PERFORMANCE, hardware number CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME03_02 and software number 1037543684, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter BR PERFORMANCE3.0 diesel 140KW
Control unit
Bosch EDC17CP46
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME03_02
Software number
1037543684
Software / calibration
6429022002

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter BR PERFORMANCE
Engine3.0 diesel 140KW
Control unit
Control unitBosch EDC17CP46
ECU makerBosch
Hardware numberCR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME03_02
Software number1037543684
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6a35bdf0fe0a8029
Identification read from the file
ECU nameEDC17CP46
Read typeCalibration only (data set)
Bosch part / software1037543684Offset in the file: 0x14001A
Software / calibration6429022002Offset in the file: 0x195D93
Data set number6429030107Offset in the file: 0x195D9E
Boot software6429040300Offset in the file: 0x195D88
Bosch project identifier (EPK)46/1/EDC17CP46/1/P695//P_695_DDC1__CV134600///Offset in the file: 0x140BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP46 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME03_02 and software number 1037543684. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP46

HardwareSoftwareVehicles
CR60NFZ-642-DCC1-906A_NAG1-140kW-EURO6_OPS-ME02_051037535765Mercedes-Benz Sprinter, Mercedes-Benz Sprinter218/318/418/518, Mercedes-Benz Sprinter219/319/419/519
CR60NFZ-642-DCC1-906A_NAG1_BF-140kW-EURO6_OPS-ME02_051037516354Mercedes-Benz Sprinter BR PERFORMANCE
CR60NFZ-642-DCC1-906A_NAG2-140kW-EURO6_OPS-ME02_051037535765Mercedes-Benz Sprinter 319, Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter
CR60NFZ-642-DCC1-906M-140kW-EURO6_OPS-ME02_051037535765Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter
CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME04_011037516354Mercedes-Benz Sprinter
CR60NFZ-642-DDC1-906A_NAG1-140kW-EURO6_OPS-ME04_011037547167Mercedes-Benz Sprinter
CR60NFZ-642-DDC1-906A_NAG2-140kW-EURO6_OPS-ME04_011037516354Mercedes-Benz Sprinter219/319/419/519, Mercedes-Benz Sprinter319
CR60NFZ-642-DDC1-906A_NAG2-140kW-EURO6_OPS-ME04_011037547167Mercedes-Benz Sprinter

Bosch EDC17CP46 original files

The Bosch EDC17CP46 unit page