Original file

Mercedes-Benz E350 Bosch EDC17CP57 CR61-HHB0-166WA-642LS-EU6_2_OPS_4x4_AJ18_3S-ME23 / 1037524982

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E350, hardware number CR61-HHB0-166WA-642LS-EU6_2_OPS_4x4_AJ18_3S-ME23 and software number 1037524982, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E350diesel
Control unit
Bosch EDC17CP57
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
CR61-HHB0-166WA-642LS-EU6_2_OPS_4x4_AJ18_3S-ME23
Software number
1037524982
Bosch part / software
10SW023534
Software / calibration
6429029602

Technical data

Vehicle
BrandMercedes-Benz
Car modelE350
Enginediesel
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR61-HHB0-166WA-642LS-EU6_2_OPS_4x4_AJ18_3S-ME23
Software number1037524982
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc042c296eaf648a8
Identification read from the file
ECU nameEDC17CP57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW023534Offset in the file: 0x02001A
Software / calibration6429029602Offset in the file: 0x02022F
Data set number6429033513Offset in the file: 0x27EAD0
Boot software0009040200Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HHB0__CV171900///Offset in the file: 0x0678C4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR61-HHB0-166WA-642LS-EU6_2_OPS_4x4_AJ18_3S-ME23 and software number 1037524982. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
CR61-HHB0-166WA-642LS-EU6_2_OPS_4X4_3S-ME221037524982Mercedes-Benz GLE, Mercedes-Benz ML, Mercedes-Benz ML350
CR61-HHB0-166WA-642LS-EU6_2_OPS_4X4_3S-ME2210SW026754Mercedes-Benz GLE, Mercedes-Benz GLE 350, Mercedes-Benz GLE350
CR61-HHB0-166WA-642LS-EU6_2_OPS_4X4_AJ18_3S-ME2310SW033945Mercedes-Benz ML350, Mercedes-Benz GLE
CR61-HHB0-166WA-642LS-EU6_2_OPS_4x4_AJ18_3S-ME23033945Mercedes-Benz GLE350
CR61-HHB0-166XA-642LS-EU6_2_OPS_4X4_3S-ME2210SW026755Mercedes-Benz GLS, Mercedes-Benz GLE
CR61-HHB0-166XA-642LS-EU6_2_OPS_4X4_AJ18_3S-ME2310SW033953Mercedes-Benz
CR61-HHB0-166XA-642LS-EU6_2_OPS_4x4_3S-ME22026755Mercedes-Benz CLS350
CR61-HHB0-166XA-642LS-EU6_2_OPS_4x4_AJ18_3S-ME2310SW033953Mercedes-Benz GLS350, Mercedes-Benz CLS350

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page