Original file

Mercedes-Benz Bosch EDC17CP57 0009040200 / 10SW054405

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz, hardware number 0009040200 and software number 10SW054405, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0009040200
Software number
10SW054405
Software / calibration
6429026603

Technical data

Vehicle
BrandMercedes-Benz
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware number0009040200
Software number10SW054405
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7eef285942bf4aa4
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW054405Offset in the file: 0x02001A
Software / calibration6429026603Offset in the file: 0x081509
Data set number6429031315Offset in the file: 0x081514
Boot software0009040200Offset in the file: 0x0814FE
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_GHB0__CV192300///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0009040200 and software number 10SW054405. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
00090402001037552808Mercedes-Benz E300 3.0 CDI V6
000904020010SW010461Mercedes-Benz CLS
000904020010SW054397Mercedes-Benz CLS350
000904020010SW054404Mercedes-Benz CLS350
000904020010SW054409Mercedes-Benz E350, Mercedes-Benz E300
000904020010SW054412Mercedes-Benz E350
000904020010SW054417Mercedes-Benz E350
000904020010SW058602Mercedes-Benz E350

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page