Original file

Fendt 412 Bosch EDC7UC31

An original (stock) flash read of the Bosch EDC7UC31 control unit, fitted in Fendt 412, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandFendt
Car model412
Engine4.0 diesel 124PS
Fueldiesel
Displacement4.0
Power124.0PS / 91.2kW
Control unit
Control unitBosch EDC7UC31
ECU makerBosch
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycc407e9e8e88a081
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC7UC31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Bosch EDC7UC31

HardwareSoftwareVehicles
Fendt 310Fendt 310
Fendt 310 VarioFendt 310 Vario
Fendt 412 VarioFendt 412 Vario
Fendt 413Fendt 413
Fendt 415Fendt 415
Fendt 415 VarioFendt 415 Vario
Fendt 714 VARIOFendt 714 VARIO
Fendt 716Fendt 716

Bosch EDC7UC31 original files

The Bosch EDC7UC31 unit page