Original file

Lamborghini Gallardo Bosch MED9.1.2 0261S02764 / 10SW003152

An original (stock) flash read of the Bosch MED9.1.2 control unit, fitted in Lamborghini Gallardo, hardware number 0261S02764 and software number 10SW003152, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Lamborghini Gallardopetrol 570PS
Control unit
Bosch MED9.1.2
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02764
Software number
10SW003152
Software / calibration
400907552G

Technical data

Vehicle
BrandLamborghini
Car modelGallardo
Enginepetrol 570PS
Power570.0PS / 419.0kW
Control unit
Control unitBosch MED9.1.2
ECU makerBosch
Hardware number0261S02764
Software number10SW003152
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4e21d8ce9c0cdc05
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02764 / 10SW003152Offset in the file: 0x1D7DAF / 0x1D7DBA
Software / calibration400907552G · version 0040Offset in the file: 0x1D7D88
Engine description5.2L V10HDZ/4V FSIOffset in the file: 0x1D7D95
Bosch project identifier (EPK)68/1/MED91/5/10450.01//56FLMA2JG_49H5_030/56FLMA2JG_49H5_030/110615/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02764 and software number 10SW003152. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.2

HardwareSoftwareVehicles
0261S027491037502022Lamborghini Gallardo, Lamborghini LP560 5.2 FSI V10, Lamborghini LP560
0261S0275910SW003144Lamborghini Gallardo
0261S027641037502771Lamborghini Gallardo
0261S027641037510576Lamborghini Superleggera
0261S027681037502840Audi RS6, Audi RS6 5.0 TFSI V10
0261S027751037537031Audi R8
0261S027761037510640Audi R8
0261S027761037525929Audi R8

Bosch MED9.1.2 original files

The Bosch MED9.1.2 unit page