Original file

Volvo V40 / V40 CC Denso MB279700-95xx

An original (stock) flash read of the Denso MB279700-95xx control unit, fitted in Volvo V40 / V40 CC, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Vehicle
Volvo V40 / V40 CC2.0 petrol 213PS
Control unit
Denso MB279700-95xx
File size
2,048.00 KB
Contents
Flash

Technical data

Vehicle
BrandVolvo
Car modelV40 / V40 CC
Engine2.0 petrol 213PS
Power213.0PS / 156.7kW
Control unit
Control unitDenso MB279700-95xx
ECU makerDenso
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1f14995c2902eaa2

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Denso MB279700-95xx whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Denso MB279700-95xx

HardwareSoftwareVehicles
Volvo S40 / V40Volvo S40 / V40
Volvo S60 T6Volvo S60 T6
Volvo V60Volvo V60
0000001362Volvo V60

Denso MB279700-95xx original files

The Denso MB279700-95xx unit page