Original file
BMW 7er Bosch MD1CP002-5 DDE832C / 10SW002569
An original (stock) flash read of the Bosch MD1CP002-5 control unit, fitted in BMW 7er, hardware number DDE832C and software number 10SW002569, 6,894.44 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 7er3.0 diesel 319PS
- Control unit
- Bosch MD1CP002-5
- File size
- 6,894.44 KB
- Contents
- Flash
- Hardware number
- DDE832C
- Software number
- 10SW002569
Technical data
| Brand | BMW |
|---|---|
| Car model | 7er |
| Engine | 3.0 diesel 319PS |
| Power | 319.5PS / 235.0kW |
| Control unit | Bosch MD1CP002-5 |
|---|---|
| ECU maker | Bosch |
| Hardware number | DDE832C |
| Software number | 10SW002569 |
| File type | Original flash read |
|---|---|
| File size | 6,894.44 KB (7,059,904 bytes) |
| File key | 62ac4429f45878f6 |
| ECU name | MD1CP002 | |
|---|---|---|
| Bosch part / software | 10SW002569 | Offset in the file: 0x024164 |
| Data set description | G11B57O0_4W6 | |
| Bosch project identifier (EPK) | 38/1/MDG1_MD1CP002/11/P_1289//VKT41/// | Offset in the file: 0x0952E8 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MD1CP002-5 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DDE832C and software number 10SW002569. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.