Original file

Bentley Continental Bosch MDG1 0P2907309A / 3SA906014B

An original (stock) flash read of the Bosch MDG1 control unit, fitted in Bentley Continental, hardware number 0P2907309A and software number 3SA906014B, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley Continental4.0
Control unit
Bosch MDG1
File size
2,048.00 KB
Contents
Flash
Hardware number
0P2907309A
Software number
3SA906014B
Bosch part / software
10SW054786

Technical data

Vehicle
BrandBentley
Car modelContinental
Engine4.0
FuelPetrol
Control unit
Control unitBosch MDG1
ECU makerBosch
Hardware number0P2907309A
Software number3SA906014B
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key94b2b87d79b06112
Identification read from the file
ECU nameMG1CS008
Bosch part / software10SW054786Offset in the file: 0x080144
Bosch project identifier (EPK)45/1/MDG1/5/P1795//DMG1008PH2C1795_MY19EB0///Offset in the file: 0x080248

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MDG1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0P2907309A and software number 3SA906014B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MDG1

Bosch MDG1 original files