Original file

Mercedes-Benz CL600 Bosch Me 2.7

An original (stock) flash read of the Bosch Me 2.7 control unit, fitted in Mercedes-Benz CL600, 512.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Vehicle
Mercedes-Benz CL6005.5 petrol 500PS
Control unit
Bosch Me 2.7
File size
512.00 KB
Contents
Flash

Technical data

Vehicle
BrandMercedes-Benz
Car modelCL600
Engine5.5 petrol 500PS
Power500.0PS / 367.7kW
Control unit
Control unitBosch Me 2.7
ECU makerBosch
File
File typeOriginal flash read
File size512.00 KB (524,288 bytes)
File key042bfd9972c130d5

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch Me 2.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch Me 2.7

Bosch Me 2.7 original files