Original file

Seat Mii Bosch ME17.5.20 04C907309C / 1037538212

An original (stock) flash read of the Bosch ME17.5.20 control unit, fitted in Seat Mii, hardware number 04C907309C and software number 1037538212, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Seat Mii1.0 · 60.0PS / 44.1kW
Control unit
Bosch ME17.5.20
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
04C907309C
Software number
1037538212
Software / calibration
04C906020H

Technical data

Vehicle
BrandSeat
Car modelMii
Engine1.0
FuelPetrol
Power60.0PS / 44.1kW
Control unit
Control unitBosch ME17.5.20
ECU makerBosch
Hardware number04C907309C
Software number1037538212
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc2fe1a1ecfa41209
Identification read from the file
ECU nameME17.5.20
Read typeCalibration only (data set)
Bosch part / software1037538212Offset in the file: 0x1C001A
Vehicle maker's hardware number04C907309COffset in the file: 0x1D7AC4
Software / calibration04C906020H · version 6468Offset in the file: 0x1D7ADE
Bosch project identifier (EPK)51/1/MED17/3/ME17.5.20//S1752V03C000_M18F76/Dst00//Offset in the file: 0x1FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04C907309C and software number 1037538212. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Seat MiiFlash2,048.00 KB€15Add to cart
SeatFlash2,048.00 KB€15Add to cart

All reads of 04C907309C / 1037538212

Other pairs of Bosch ME17.5.20

Bosch ME17.5.20 original files