Original file

Volkswagen Bosch ME17.5.26 04E907309AL / 10SW009333

An original (stock) flash read of the Bosch ME17.5.26 control unit, fitted in Volkswagen, hardware number 04E907309AL and software number 10SW009333, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
VolkswagenCWVB
Control unit
Bosch ME17.5.26
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
04E907309AL
Software number
10SW009333
Software / calibration
04E906057DG

Technical data

Vehicle
BrandVolkswagen
EngineCWVB
Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04E907309AL
Software number10SW009333
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3a1771b074092168
Identification read from the file
ECU nameME17.5.26
Read typeFull read (boot area included)
Bosch part / software10SW009333Offset in the file: 0x04001A
Vehicle maker's hardware number04E907309ALOffset in the file: 0x039774
Software / calibration04E906057DG · version 3412Offset in the file: 0x03978E
Internal build stringMED17 CB.04.04.01Offset in the file: 0x00F488
Bosch project identifier (EPK)38/1/MED17/3///S17526V05C000_M24E61///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309AL and software number 10SW009333. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.26

HardwareSoftwareVehicles
04E907309AH10SW005005Volkswagen
04E907309AH10SW005009Volkswagen
04E907309AH10SW005011Volkswagen
04E907309AL10SW009332Volkswagen
04E907309AL10SW011712Volkswagen
04E907309CB003260Seat Ibiza
04E907309CB003261Volkswagen Polo 1.0 MPI
04E907309CB004984Škoda Fabia 2

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page