Original file

Volkswagen Bosch ME17.5.26 04E907309CP / 10SW026894

An original (stock) flash read of the Bosch ME17.5.26 control unit, fitted in Volkswagen, hardware number 04E907309CP and software number 10SW026894, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
VolkswagenCWVA
Control unit
Bosch ME17.5.26
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
04E907309CP
Software number
10SW026894
Software / calibration
04E906057EJ

Technical data

Vehicle
BrandVolkswagen
EngineCWVA
Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04E907309CP
Software number10SW026894
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye1dfbfb9b7262883
Identification read from the file
ECU nameME17.5.26
Read typeFull read (boot area included)
Bosch part / software10SW026894Offset in the file: 0x04001A
Vehicle maker's hardware number04E907309CPOffset in the file: 0x03A55C
Software / calibration04E906057EJ · version 5279Offset in the file: 0x03A576
Internal build stringMED17 CB.04.04.03Offset in the file: 0x00F96C
Bosch project identifier (EPK)38/1/MED17/3///S17526V23C000_M24GB1///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309CP and software number 10SW026894. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.26

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page