Original file

Sea-Doo Spark Bosch ME17.8.5 7A1128RA8FOS5 / 1037525858

An original (stock) flash read of the Bosch ME17.8.5 control unit, fitted in Sea-Doo Spark, hardware number 7A1128RA8FOS5 and software number 1037525858, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Sea-Doo Spark0.9 petrol 90PS
Control unit
Bosch ME17.8.5
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
7A1128RA8FOS5
Software number
1037525858
Bosch part / software
10SW011328
Software / calibration
VM7A170128E0

Technical data

Vehicle
BrandSea-Doo
Car modelSpark
Engine0.9 petrol 90PS
Power90.0PS / 66.2kW
Control unit
Control unitBosch ME17.8.5
ECU makerBosch
Hardware number7A1128RA8FOS5
Software number1037525858
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key8744e5a72d2d383d
Identification read from the file
Read typeFull read (boot area included)
Bosch part / software10SW011328Offset in the file: 0x04001A
Software / calibrationVM7A170128E0Offset in the file: 0x0FFE10
Internal build stringPLATFORM VM_CB.04.80.00Offset in the file: 0x012C58
Bosch project identifier (EPK)30/1/MED17////7A1128R/A8FOS5//Offset in the file: 0x03FE10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.8.5 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 7A1128RA8FOS5 and software number 1037525858. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.8.5

HardwareSoftwareVehicles
01515619271037524060Sea-Doo
5240601037524060Sea-Doo RXT-X
7A1124NA0RDS21037521129Sea-Doo RXP-X
7A1124OA0RDS11037524060Sea-Doo RXP-X
7A1150QC7FOS41037550003Sea-Doo RXP
7E5169OF4VVS210SW039513Can-Am Outlander
7E5173NK9VIS11037550003Can-Am MAVERICK
7F1124NB5RDS11037520674Sea-Doo Wake

Bosch ME17.8.5 original files

The Bosch ME17.8.5 unit page