Original file
Cadillac BLS Bosch ME9.1/ME9.5
An original (stock) flash read of the Bosch ME9.1/ME9.5 control unit, fitted in Cadillac BLS, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
- Vehicle
- Cadillac BLSBLS · 255.0PS / 187.5kW
- Control unit
- Bosch ME9.1/ME9.5
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
Technical data
| Brand | Cadillac |
|---|---|
| Car model | BLS |
| Engine | BLS |
| Fuel | Petrol |
| Displacement | 2.8 |
| Power | 255.0PS / 187.5kW |
| Control unit | Bosch ME9.1/ME9.5 |
|---|---|
| ECU maker | Bosch |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| From the file name | L533CC0 |
| File key | ff85f9c9d1f84dd7 |
| ECU name | ME9.6 | |
|---|---|---|
| Read type | Calibration only (data set) |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch ME9.1/ME9.5 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.