Original file

Audi A8 Bosch MED17.1.61 07P906027A / 07P907309

An original (stock) flash read of the Bosch MED17.1.61 control unit, fitted in Audi A8, hardware number 07P906027A and software number 07P907309, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A86.3 petrol 500PS
Control unit
Bosch MED17.1.61
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
07P906027A
Software number
07P907309
Bosch part / software
10SW004930

Technical data

Vehicle
BrandAudi
Car modelA8
Engine6.3 petrol 500PS
Control unit
Control unitBosch MED17.1.61
ECU makerBosch
Hardware number07P906027A
Software number07P907309
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key693fd99c324effcc
Identification read from the file
ECU nameMED17.1.61
Read typeFull read (boot area included)
Bosch part / software10SW004930Offset in the file: 0x38001A
Vehicle maker's hardware number07P907309Offset in the file: 0x3BC344
Software / calibration07P906027A · version 8556Offset in the file: 0x3BC35E
Bosch project identifier (EPK)38/1/MED17/1///D17161V01C000_NY16D1///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.61 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07P906027A and software number 07P907309. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.61

Bosch MED17.1.61 original files