Original file

Volkswagen Teramont Bosch MED17.1.62 03H907309L / 03H907309L

An original (stock) flash read of the Bosch MED17.1.62 control unit, fitted in Volkswagen Teramont, hardware number 03H907309L and software number 03H907309L, 4,352.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Teramont2.5 petrol · 300.0PS / 220.6kW
Control unit
Bosch MED17.1.62
Read type
Full read (boot area included)
File
4,352.00 KB · Flash
Hardware number
03H907309L
Software number
03H907309L
Bosch part / software
10SW037520
Software / calibration
03H906026A

Technical data

Vehicle
BrandVolkswagen
Car modelTeramont
Engine2.5 petrol
Power300.0PS / 220.6kW
Control unit
Control unitBosch MED17.1.62
ECU makerBosch
Hardware number03H907309L
Software number03H907309L
File
File typeOriginal flash read
File size4,352.00 KB (4,456,448 bytes)
File key7233d8499276af18
Identification read from the file
ECU nameMED17.1.61
Read typeFull read (boot area included)
Bosch part / software10SW037520Offset in the file: 0x38001A
Vehicle maker's hardware number03H907309LOffset in the file: 0x3C8410
Software / calibration03H906026A · version 6346Offset in the file: 0x3C842A
Bosch project identifier (EPK)46/1/MED17/3/MED17161//D17162V03C000_M17Q40///Offset in the file: 0x3FFE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03H907309L and software number 03H907309L. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen TeramontFlash4,096.00 KB€15Add to cart
Volkswagen TeramontFlash4,096.00 KB€15Add to cart

All reads of 03H907309L / 03H907309L

Other pairs of Bosch MED17.1.62

Bosch MED17.1.62 original files