Original file

Audi TT RS 2.5 TFSI Bosch MED17.1.62 07K907309F / 065830

An original (stock) flash read of the Bosch MED17.1.62 control unit, fitted in Audi TT RS 2.5 TFSI, hardware number 07K907309F and software number 065830, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi TT RS 2.5 TFSI2.5 petrol 400.0PS / 294.2kW
Control unit
Bosch MED17.1.62
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
07K907309F
Software number
065830
Bosch part / software
10SW065830
Software / calibration
8S0907404L

Technical data

Vehicle
BrandAudi
Car modelTT RS 2.5 TFSI
Engine2.5 petrol 400.0PS / 294.2kW
Control unit
Control unitBosch MED17.1.62
ECU makerBosch
Hardware number07K907309F
Software number065830
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key842b4adf79025c9b
Identification read from the file
ECU nameMED17.1.62
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW065830Offset in the file: 0x02001A
Vehicle maker's hardware number07K907309FOffset in the file: 0x3E5E52
Software / calibration8S0907404L · version 0001Offset in the file: 0x3E5E6C
Internal build stringMED17 CB.09.07.00Offset in the file: 0x20FD38
Bosch project identifier (EPK)38/1/MED17/5///D17162A02C000_MY22J0///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309F and software number 065830. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.62

HardwareSoftwareVehicles
07K907309E8V0907404EAudi RS3
07K907309F044522Audi RS3 2.5 TFSI, Audi RS3 Sportback 2.5 TFSI quattro 7AT, Audi RS3 Sportback 2.5 TFSI quattro 7AT - 367hp
07K907309F049335Audi RS3 2.5 TFSI, Audi TT3 RS 2.5 TFSI, Audi RS3
07K907309F052832Audi Q3 RS 2.5T-FSI 400HP OPF, Audi RS3 2.5 TFSI, Audi RSQ3 2.5 TFSI
07K907309F065835Audi RS Q3 2.5 TFSI
07K907309F07K907309FAudi RS3, Audi RSQ3, Audi TT RS
07K907309F10SW044522Audi RS3
07K907309F10SW049335Audi RS3

Bosch MED17.1.62 original files