Original file

Audi Bosch MED17.1.62 07K907309F / 10SW067005

An original (stock) flash read of the Bosch MED17.1.62 control unit, fitted in Audi, hardware number 07K907309F and software number 10SW067005, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
AudiDNWA
Control unit
Bosch MED17.1.62
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
07K907309F
Software number
10SW067005
Software / calibration
83A907404

Technical data

Vehicle
BrandAudi
EngineDNWA
Control unit
Control unitBosch MED17.1.62
ECU makerBosch
Hardware number07K907309F
Software number10SW067005
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key62c4d1b7e44d3b1f
Identification read from the file
ECU nameMED17.1.62
Read typeFull read (boot area included)
Bosch part / software10SW067005Offset in the file: 0x02001A
Vehicle maker's hardware number07K907309FOffset in the file: 0x3E5BD2
Software / calibration83A907404 · version 0003Offset in the file: 0x3E5BEC
Internal build stringMED17 CB.09.07.00Offset in the file: 0x20FD38
Bosch project identifier (EPK)38/1/MED17/5///D17162A02C000_MY20F5///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K907309F and software number 10SW067005. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.62

HardwareSoftwareVehicles
07K907309F10SW049335Audi RS3
07K907309F10SW049336Audi TT RS Coupe, Audi TT, Audi Salvo
07K907309F10SW052832Audi RSQ3, Audi RS3 Sportback
07K907309F10SW065835Audi RSQ3
07K907309F10SW084544Audi
07K907309F10SW085131Audi
07K907309F83A907404Audi RSQ3, Audi RS Q3
07K907309F83A907404BAudi TT RS, Audi Q3 RS ***, Audi Q3 RS

Bosch MED17.1.62 original files