Original file

Bentley Bosch MED17.1.62 07P906026AB / 10SW050516

An original (stock) flash read of the Bosch MED17.1.62 control unit, fitted in Bentley, hardware number 07P906026AB and software number 10SW050516, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley
Control unit
Bosch MED17.1.62
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
07P906026AB
Software number
10SW050516
Vehicle maker's hardware number
07P907309F

Technical data

Vehicle
BrandBentley
Car modelBentley
Control unit
Control unitBosch MED17.1.62
ECU makerBosch
Hardware number07P906026AB
Software number10SW050516
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keybb456a1f69f5fe24
Identification read from the file
ECU nameMED17.1.62
Read typeFull read (boot area included)
Bosch part / software10SW050516Offset in the file: 0x02001A
Vehicle maker's hardware number07P907309FOffset in the file: 0x3E49A4
Software / calibration07P906026AB · version 0139Offset in the file: 0x3E49BE
Internal build stringMED17 CB.09.06.00Offset in the file: 0x216FAD
Bosch project identifier (EPK)51/1/MED17/1/D17162V01C000//D17162V01C000_NY20E1///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07P906026AB and software number 10SW050516. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.62

HardwareSoftwareVehicles
07K907309F83A907404Audi RSQ3, Audi RS Q3
07K907309F83A907404BAudi TT RS, Audi Q3 RS ***, Audi Q3 RS
07K907309F8S0907404HAudi TT RS
07K907309F8V0907404HAudi RS3
07P906026AC10SW050538Bentley
07P906026AD10SW050450Bentley
07P906026AE10SW051159Bentley
07P907309F10SW008743Bentley

Bosch MED17.1.62 original files