Original file

Bentley Bosch MED17.1.62 07P907309F / 10SW011544

An original (stock) flash read of the Bosch MED17.1.62 control unit, fitted in Bentley, hardware number 07P907309F and software number 10SW011544, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley
Control unit
Bosch MED17.1.62
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
07P907309F
Software number
10SW011544
Software / calibration
07P906026P

Technical data

Vehicle
BrandBentley
Car modelBentley
Control unit
Control unitBosch MED17.1.62
ECU makerBosch
Hardware number07P907309F
Software number10SW011544
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye4afe9b42c688f71
Identification read from the file
ECU nameMED17.1.62
Read typeFull read (boot area included)
Bosch part / software10SW011544Offset in the file: 0x02001A
Vehicle maker's hardware number07P907309FOffset in the file: 0x3E15F4
Software / calibration07P906026P · version 2132Offset in the file: 0x3E160E
Internal build stringMED17 CB.09.06.00Offset in the file: 0x216FAD
Bosch project identifier (EPK)51/1/MED17/1/D17162V01C000//D17162V01C000_NY16M1///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07P907309F and software number 10SW011544. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.62

Bosch MED17.1.62 original files