Original file

Bentley Bosch ME17.1.6 07C906023CG / 10SW023586

An original (stock) flash read of the Bosch ME17.1.6 control unit, fitted in Bentley, hardware number 07C906023CG and software number 10SW023586, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley
Control unit
Bosch ME17.1.6
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07C906023CG
Software number
10SW023586
Vehicle maker's hardware number
07C907309

Technical data

Vehicle
BrandBentley
Control unit
Control unitBosch ME17.1.6
ECU makerBosch
Hardware number07C906023CG
Software number10SW023586
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd13b1f274a0d7b1d
Identification read from the file
ECU nameMED17.1.6
Read typeOBD read (no boot area)
Bosch part / software10SW023586Offset in the file: 0x02001A
Vehicle maker's hardware number07C907309Offset in the file: 0x3C1E5A
Software / calibration07C906023CG · version 2145Offset in the file: 0x3C1E74
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E8D6
Bosch project identifier (EPK)49/1/MED17/3/D171633//S1716B16C000_NY18B4/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07C906023CG and software number 10SW023586. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.1.6

HardwareSoftwareVehicles
07C906023CD10SW007113Bentley
07C906023CE10SW006810Bentley
07C906023CF10SW023532Bentley Continental GT 6.0i
07C906023CF10SW026998Bentley
07C906023CG10SW026903Bentley
07C906023E1037532311Bentley Continental GT 6.0i
07C906023G1037539200Bentley Continental GT 6.0i
07C906023K1037523884Bentley Continental, Bentley

Bosch ME17.1.6 original files

The Bosch ME17.1.6 unit page